Cara Mengatasi Flashdisk Overwrite

Flash Overwrite is not a big problem. However, the problem is very annoying and takes quite a while to overcome.

Overwrite is a condition where the flashdisk that we have is locked, so users cannot format, add data, or even delete data.

Overwrite can occur due to many things, including the origin of unplugging the flash from the computer, viruses, and so forth.

To overcome this problem, users can do a number of things, such as by using Command Prompt, Regedit, or third-party application assistance.

The simplest way is recommended to overcome the Flash Overwrite problem is to use the commands in the Command Prompt. This method is quite easy, because every computer with Windows operating system must have it by default.

To do this, users can follow the steps below.

How to Overcome the Write Protected Flashdisk with CMD

1. Connect the flash drive to the computer.

2. Open the Command Prompt as Administrator.

3. Type the diskpart command.

4. Then the command listdisk, and select my disk, replace me with the number for the flashdisk.

5. Type the disk attributes clear readonly, after finishing typing the command clean.

6. Then type format fs = fat32 or format fs = ntfs according to the desired disk format.

7. After that type exit.

Yang perlu diingat, setiap mengetikan perintah dalam Command Prompt, pengguna juga harus menekan tombol Enter untuk mengaktifkan perintah tersebut.

Cara Mengatasi Flashdisk Write Protected Dengan Registry Editor

Jika dengan menggunakan Command Prompt belum berhasil, pengguna dapat mengatasi flashdisk write protected dengan Registry Editor (Regedit). Untuk menggunakan Regedit dalam memecahkan masalah flashdisk write protected, berikut ini langkah-langkahnya:

1. Buka Regedit dengan menekan tombol Windows + R dan ketikan Regedit diikuti tombol Enter

2. Masuk ke bagian HKEY_LOCAL_MACHINE kemudian SYSTEM lalu CurrentControlSet cari Control dan masuk ke StorageDevicePolicies

3. Cari opsi WriteProtect, klik kanan di opsi tersebut dan pilih Modify

4. Lalu ubah value data ke angka 0, dan klik OK

5. Jika sudah, cabut flashdisk, restart komputer, dan tancapkan flashdisk kembali untuk memformatnya.